Product details
- Combining aviary and Run
- In order to combine ren and pet house, a lattice panel and/or door should be removed
- Aviary with the following features:
- This aviary is made of beautiful pine wood
- The roof of this splendid cage is neatly finished with felt roofing with slate
- This additional run can be placed on the left and right side against the pet house
- The bottom of this aviary is open
- This aviary is equipped with 6 larger and 2 small practical doors
- This aviary has 2 nest boxes at the top of the cage
- This aviary is equipped with a rotating feeding system. Therefore the birds can be easily fed
- Particularities:
- Building kit with mostly pre-assembled panels, incl. fixing materials and instructions
- Parakeets can crack the wood of the cage
- This combination can be extended infinitely with additional runs and/or aviary Hannah
- New
- This run is made of beautiful pine wood
- The bottom of this run is open
- The roof of the additional run is equipped with mesh (ca. 12x12mm)
- If there is high humidity outside, then it is also humid inside a loft. This can cause mold to grow.
Dimensions
| Outer dimensions including roof (DxH) | Main aviary: 120x187cm |
| Outer dimensions of extended run (BxD) | Per run: 115x52,5x135,5cm |
| Internal cross-section | 99cm |
| Perches | 5 |
| Shelf thickness | approx. 9mm |
| Frame thickness | 35x20mm |
Dimensions of shipping boxes
| Box 1 | 149,5 x 55,6 x 17,5cm — 27,5kg |
| Box 2 | 70 x 65 x 16,5cm — 15kg |
| Box 3 | 140,5 x 60,5 x 15cm — 13kg |
Maintainance instructions
- You should stain the wood to prevent mold or wood rot
- It is advisable to clean the wood periodically to prevent mold and green mold
- You can stain it in any desired colour.
- Treat the hinges and locks periodically with silicone spray
- If possible, place the pet house at a sheltered place.
- Matching stain for the white parts is White wash stain
- Matching stain for the gray parts is Grey wash stain
Instructions for assembly
- Assembly instruction and fastening material is included
- The holes in the panels are pre-drilled, except for the locks
- When it is not in a sheltered place we advise you to anchor the pet house
- With only one screwdriver/machine you can assemble the complete pet house
- Place the pet house straight on a flat and firm surface
Information about used materials
This pet house is made from pine wood in the traditional way. Pine wood is a particularly beautiful kind of coniferous wood which has been valued for a long time in our range of pet houses. Especially the wood grain, flame drawing, and changing color shades give the enclosure a solid and warm appearance.
Wood properties
The wood, used for your pet house is a unique natural product which has been processed according to traditional methods in the country of origin, after careful selection. It is characteristic and unique in every way. This wood product has been manually processed. No single piece of wood is the same in shape, structure or color, so color shades are inevitable even within one piece of wood. Wind cracks, imperfections and the presence of large and small knots testify to their origin and years of growth. Bumps are usually manually updated with wood fill. Through use and through the influence of light, new pet houses will finally get a warmer color. Color differences in comparison with the show model or even among themselves are therefore usual. The pet house is stained in the colors as in the picture. You should do it once again to prevent mold and rot. You can easily order the stain together with the pet house.
Hinges and locks/anchorage
It is advisable to treat the hinges and locks periodically with silicone spray or lock spray to prevent rust and corrosion. If the pet house is not in a covered place, we advise you to anchor the house.