Aviary Flex 2.2 corner-unit with safety porch and sleeping compartment 182x183x196cm More photos Design your own Flex in 3D

Aviary Flex 2.2 is a beautiful aviary for outside with many practical details. The aviary is provided with a safety porch, so that you can reach the birds, with less chance that they could escape. The sleeping compartment is provided with 2 doors. The round fly hole is lockable. The aviary has a storage room, perches and a form plywood roof. The Flex is a beautiful aviary, which you can adapt to your own wishes!

Product details

  • **There can be colour differences in Douglas fir. This depends on whether the wood is from the outside of the tree or is heartwood. This colour difference gradually diminishes, due to ageing and discolouration.
  • Flex with the following characteristics:
  • Made of Douglas wood. Frames of 68x44mm, shelves of 18mm thickness. Even without treatment this wood will be sustainable for about 15 years, however it will become grey quickly without treatment.
  • The FLEX consist of Standard panels. Therefore you can get it as you want. In the productname, the number of panels is being mentioned. For exemple, FLEX 3.1 is 3 panels wide, and one panel deep.
  • The hutch is made of panels of 180x85cm or 180x120cm. This can be screwed together. Drill bit, screws and bits are included.
  • The wooden panels have a wooden frame of 68x44 with shelves of 18mm thick
  • Meshpannels with black plasticized mesh of 1,1 mm thickness. Mesh of 13x13 mm
  • Particularities:
  • Insulation kit for the Flexpanels 85cm and 120cm is available separately
  • If there is high humidity outside, then it is also humid inside a loft. You can treat the inside of the loft with stain to prevent the mold to grow.

Dimensions

Outer dimensions including roof (WxDxH) 182x183x196cm
Outer ground dimensions (WxD) 170x179x94cm
Internal dimensions sleeping compartment (WxDxH) 75x30x85cm
Internal dimensions run (WxDxH) 165x75x190cm
Internal dimensions safety porch (WxDxH) 75x50x190cm
Perches 2 in sleeping comp., 2 in run
Thickness vertical beams 68x44mm
Thickness shelves 18mm

Maintainance instructions

  • To avoid that the Douglas wood becomes grey, we advise to use Douglas oil
  • Treat the hinges and locks periodically with silicone spray
  • Use some wax or vaseline for moving parts such as drawers and sliding panels

Instructions for assembly

  • Delivered like a kit, with pre-assembled panels. The panels can be easily fixed to each other. Everything is pre-drilled. Drill bit, screws and bits are included.
  • The pannels are ready to use. Door(s) and locks and mesh already assembled. Therefore the assembly is really easy.
  • A foundation of 4,5 cm high, will be delivered as well. At the foundation you fix the panels. Therefore we advice a flat surface.
  • This product is being delivered at a pallet, by a lorry with pallet truck and tailgate. Please keep in mind that the pallet truck requires a hard surface!
EAN code: 8719874158510
Information

Our products

Shopping cart

Save/load shopping cart Explanation

Save shopping cart

You can save your shopping cart for 30 days. You will then receive a unique number that you can save. If you want to retrieve it, enter the number and use the "Retrieve" button.

Number: