Rabbit hutch Sunshine 116x112x134cm More photos

Rabbit hutch Sunshine is provided with a flower box! A beautiful hutch with a sleeping compartment, a run and a removable tray. The hutch has a run on the lower floor, with a height of 58cm. The two floors are connected through a ramp. The roof of the hutch is provided with black roofing felt. Suitable for 2 rabbits. The maximal dimensions, including the roof, are 116x112x134cm.

Product details

  • Rabbit hutch with the following features:
  • The pet house is made of beautiful pine wood
  • The roof of this rabbit hutch is equipped with roofing felt
  • With galvanized mesh, approx. 12x12mm, thickness 0.8mm
  • Equipped with a ramp between the first and ground floor
  • Metal tray (zinc) to clean the hutch very easily
  • The pet house is not equipped with anti-chewing strips. To prevent chewing you can order anti chewing stripes.
  • Building kit with mostly pre-assembled panels, incl. fixing materials and instructions
  • Particularities:
  • This loft can not be built in mirror image
  • If there is high humidity outside, then it is also humid inside a loft. This can cause mold to grow.
  • In case of damp weather, the wood can expand and the doors will clamp
  • This hutch has been painted once, but we advise to paint it again for a beautiful result.
  • If the pet house is being used as an indoor cage, we advise you to cover the floor to prevent damage caused by urine, for example
  • Run with different depth then the hutch:
  • Rabbit run Multirun White
  • Heavy free-range enclosure 8 panels

Dimensions

Outer dimensions incl. roof and nest box (WxDxH) 116x112x134cm
Outer ground dimensions (WxD) 104x100cm
Internal dimensions of the 1st floor (WxD) 64x68cm
Internal dimensions sleeping compartment (BxD) 44x68cm
Internal dimensions nest box (WxDxH) 68x30x29cm
Internal dimensions bottom run (BxD) 100x96cm
Height below the sleeping quarter (H) 58cm
Shelf thickness approx. 9mm
Frame thickness 30x20mm

Dimensions of shipping boxes

Box 1 106 x 78 x 12cm — 13,8kg
Box 2 114 x 62 x 22cm — 21kg

Maintainance instructions

  • You should stain the wood to prevent mold or wood rot
  • It is advisable to clean the wood periodically to prevent mold and green mold
  • You can stain it in any desired colour.
  • Treat the hinges and locks periodically with silicone spray
  • Use some wax or vaseline for moving parts such as drawers and sliding panels
  • If possible, place the pet house at a sheltered place.
  • Matching stain for the white parts is White wash stain
  • Matching stain for the gray parts is Grey wash stain

Instructions for assembly

  • The pet house is delivered in sturdy cardboard box/boxes
  • Assembly instruction and fastening material is included
  • The holes in the panels are pre-drilled, except for the locks
  • When it is not in a sheltered place we advise you to anchor the pet house
  • You can easily order soil anchors as well
  • With only one screwdriver/machine you can assemble the complete pet house
  • Place the pet house straight on a flat and firm surface

Information about used materials

This pet house is made from pine wood in the traditional way. Pine wood is a particularly beautiful kind of coniferous wood which has been valued for a long time in our range of pet houses. Especially the wood grain, flame drawing, and changing color shades give the enclosure a solid and warm appearance.

Wood properties
The wood, used for your pet house is a unique natural product which has been processed according to traditional methods in the country of origin, after careful selection. It is characteristic and unique in every way. This wood product has been manually processed. No single piece of wood is the same in shape, structure or color, so color shades are inevitable even within one piece of wood. Wind cracks, imperfections and the presence of large and small knots testify to their origin and years of growth. Bumps are usually manually updated with wood fill. Through use and through the influence of light, new pet houses will finally get a warmer color. Color differences in comparison with the show model or even among themselves are therefore usual. The pet house is stained in the colors as in the picture. You should do it once again to prevent mold and rot. You can easily order the stain together with the pet house.

Hinges and locks/anchorage
It is advisable to treat the hinges and locks periodically with silicone spray or lock spray to prevent rust and corrosion. If the pet house is not in a covered place, we advise you to anchor the house.

EAN code: 8719558675050
Information

Our products

Shopping cart

Save/load shopping cart Explanation

Save shopping cart

You can save your shopping cart for 30 days. You will then receive a unique number that you can save. If you want to retrieve it, enter the number and use the "Retrieve" button.

Number: