Rabbit hutch Julia white-grey with nesting box 200x75x104cm
PRIJSKNALLER
More photos

The rabbit hutch Julia has a large sleeping compartment and a run with a roof. The run has a removable mesh panel, so that you can extend the hutch very easily. The hutch Julia is suitable for 1 till 3 rabbits. The maximal dimensions, incl. roof and nesting box, are 200x75x104cm.

Product details

  • Rabbit hutch with the following features:
  • The pet house is made of beautiful pine wood
  • The rabbit hutch has a plastic roof
  • With galvanized mesh, approx. 12x12mm, thickness 0.8mm
  • Equipped with a ramp between the first and ground floor
  • Convenient drawer with fixed plastic inner tray
  • Lockable sleeping compartment: door slides to the side (left/right)
  • The doors of this rabbit hutch are equiped with double locks
  • Building kit with mostly pre-assembled panels, incl. fixing materials and instructions
  • Particularities:
  • This loft can not be built in mirror image
  • If there is high humidity outside, then it is also humid inside a loft. This can cause mold to grow.
  • In case of damp weather, the wood can expand and the doors will clamp
  • This hutch has been painted once, but we advise to paint it again for a beautiful result.
  • If the pet house is being used as an indoor cage, we advise you to cover the floor to prevent damage caused by urine, for example
  • Run with different depth then the hutch:
  • Rabbit run Ambiance Small
  • Heavy free-range enclosure 8 panels

Dimensions

Outer dimensions incl. roof and nest box (WxDxH) 200x75x104cm
Outer ground dimensions (WxD) 161x69cm
Internal dimensions sleeping compartment (WxDxH) 65x50x60
Internal dimensions nest box (WxDxH) 69x35x38
Shelf thickness approx. 9mm
Frame thickness 35x20mm

Dimensions of shipping boxes

Box 1 65 x 35 x 13cm — 7kg
Box 2 106 x 69 x 19cm — 16kg
Box 3 99 x 77 x 14cm — 15kg

Maintainance instructions

  • You should stain the wood to prevent mold or wood rot
  • It is advisable to clean the wood periodically to prevent mold and green mold
  • You can stain it in any desired colour.
  • Treat the hinges and locks periodically with silicone spray
  • Use some wax or vaseline for moving parts such as drawers and sliding panels
  • If possible, place the pet house at a sheltered place.
  • Matching stain for the white parts is White wash stain
  • Matching stain for the gray parts is Grey wash stain
  • To keep your pet house flat and firm, it is advisable to place the pet house on a foundation set

Instructions for assembly

  • The pet house is delivered in sturdy cardboard box/boxes
  • Assembly instruction and fastening material is included
  • The holes in the panels are pre-drilled, except for the locks
  • When it is not in a sheltered place we advise you to anchor the pet house
  • With only one screwdriver/machine you can assemble the complete pet house
  • Place the pet house straight on a flat and firm surface
  • A foundation set is available for this pet house

Information about used materials

This pet house is made from pine wood in the traditional way. Pine wood is a particularly beautiful kind of coniferous wood which has been valued for a long time in our range of pet houses. Especially the wood grain, flame drawing, and changing color shades give the enclosure a solid and warm appearance.

Wood properties
The wood, used for your pet house is a unique natural product which has been processed according to traditional methods in the country of origin, after careful selection. It is characteristic and unique in every way. This wood product has been manually processed. No single piece of wood is the same in shape, structure or color, so color shades are inevitable even within one piece of wood. Wind cracks, imperfections and the presence of large and small knots testify to their origin and years of growth. Bumps are usually manually updated with wood fill. Through use and through the influence of light, new pet houses will finally get a warmer color. Color differences in comparison with the show model or even among themselves are therefore usual. The pet house is stained in the colors as in the picture. You should do it once again to prevent mold and rot. You can easily order the stain together with the pet house.

Hinges and locks/anchorage
It is advisable to treat the hinges and locks periodically with silicone spray or lock spray to prevent rust and corrosion. If the pet house is not in a covered place, we advise you to anchor the house.

EAN code: 8719558674374
Information

Our products

Shopping cart

Save/load shopping cart Explanation

Save shopping cart

You can save your shopping cart for 30 days. You will then receive a unique number that you can save. If you want to retrieve it, enter the number and use the "Retrieve" button.

Number: