The little rabbit hutch Blecky is suitable for your little rabbit or guinea pigs. The hutch can be moved very easily. The run has no floor.
Product details
- Rabbit hutch with the following features:
- The pet house is made of beautiful pine wood
- Solid black coated lattice, thickness 2 to 3mm, mesh size approx. 25x100mm
- The sleeping compartment is not lockable
- Building kit with mostly pre-assembled panels, incl. fixing materials and instructions
- Attached run
- The extension run has a wire roof
- Particularities:
- If there is high humidity outside, then it is also humid inside a loft. This can cause mold to grow.
- In case of damp weather, the wood can expand and the doors will clamp
- If the pet house is being used as an indoor cage, we advise you to cover the floor to prevent damage caused by urine, for example
- Run with different depth then the hutch:
- Heavy free-range enclosure 8 panels
Dimensions
| Outer dimensions including roof (WxDxH) | 120x50x45cm |
| Outer ground dimensions (WxD) | 120x50cm |
| Internal dimensions run (WxDxH) | 44x77x40cm |
| Internal dimensions behind draft baffle (WxD) | 44x37cm |
| Frame thickness | 30x20mm |
Dimensions of shipping boxes
| Box 1 | 125 x 51 x 8cm — 12kg |
Maintainance instructions
- You should stain the wood to prevent mold or wood rot
- It is advisable to clean the wood periodically to prevent mold and green mold
- You can stain it in any desired colour.
- If possible, place the pet house at a sheltered place.
- Matching stain is a transparent or Nature brown stain
Instructions for assembly
- The pet house is delivered in sturdy cardboard box/boxes
- Assembly instruction and fastening material is included
- The holes in the panels are pre-drilled, except for the locks
- With only one screwdriver/machine you can assemble the complete pet house
- Place the pet house straight on a flat and firm surface
Information about used materials
This pet house is made from pine wood in the traditional way. Pine wood is a particularly beautiful kind of coniferous wood which has been valued for a long time in our range of pet houses. Especially the wood grain, flame drawing, and changing color shades give the enclosure a solid and warm appearance.
Wood properties
The wood, used for your pet house is a unique natural product which has been processed according to traditional methods in the country of origin, after careful selection. It is characteristic and unique in every way. This wood product has been manually processed. No single piece of wood is the same in shape, structure or color, so color shades are inevitable even within one piece of wood. Wind cracks, imperfections and the presence of large and small knots testify to their origin and years of growth. Bumps are usually manually updated with wood fill. Through use and through the influence of light, new pet houses will finally get a warmer color. Color differences in comparison with the show model or even among themselves are therefore usual. The pet house is stained in the colors as in the picture. You should do it once again to prevent mold and rot. You can easily order the stain together with the pet house.
Hinges and locks/anchorage
It is advisable to treat the hinges and locks periodically with silicone spray or lock spray to prevent rust and corrosion. If the pet house is not in a covered place, we advise you to anchor the house.