Chicken coop Kathedraal Large Combi

• Combining Hutch and Run
• To assemble this combination like you see on the picture, the left pet house should be built up in mirror image.
• In order to combine ren and pet house, a lattice panel and/or door should be removed
• Chicken coop with the following features:
• The pet house is made of beautiful pine wood
• The roof of this rabbit hutch is equipped with roofing felt
• The pet house has a handy storage attic
• Equipped with a ramp between the first and ground floor
• Metal tray (zinc) to clean the hutch very easily
• Lockable sleeping compartment: door slides to the side (left/right)
• The doors of this rabbit hutch are equiped with double locks
• Building kit with mostly pre-assembled panels, incl. fixing materials and instructions
• Attached run
• The roof of the additional run is equipped with mesh (ca. 12x12mm)
• Particularities:
• With some adaptation this hutch can be mounted in mirror image
• This chicken coop is equipped with a nest box
• If there is high humidity outside, then it is also humid inside a loft. This can cause mold to grow.
• In case of damp weather, the wood can expand and the doors will clamp
• This hutch has been painted once, but we advise to paint it again for a beautiful result.
• Appropriate additional run:
• Rabbit run Kathedraal

• You should stain the wood to prevent mold or wood rot
• You can stain it in any desired colour.
• Treat the hinges and locks periodically with silicone spray
• Use some wax or vaseline for moving parts such as drawers and sliding panels
• If possible, place the pet house at a sheltered place.
• Klaxo white chalk for treatment of the sleeping compartment against blood lice can be ordered immediately as well

• The pet house is delivered in sturdy cardboard box/boxes
• Assembly instruction and fastening material is included
• The holes in the panels are pre-drilled, except for the locks
• When it is not in a sheltered place we advise you to anchor the pet house
• With only one screwdriver/machine you can assemble the complete pet house
• Place the pet house straight on a flat and firm surface

This pet house is made from pine wood in the traditional way. Pine wood is a particularly beautiful kind of coniferous wood which has been valued for a long time in our range of pet houses. Especially the wood grain, flame drawing, and changing color shades give the enclosure a solid and warm appearance.

Wood properties
The wood, used for your pet house is a unique natural product which has been processed according to traditional methods in the country of origin, after careful selection. It is characteristic and unique in every way. This wood product has been manually processed. No single piece of wood is the same in shape, structure or color, so color shades are inevitable even within one piece of wood. Wind cracks, imperfections and the presence of large and small knots testify to their origin and years of growth. Bumps are usually manually updated with wood fill. Through use and through the influence of light, new pet houses will finally get a warmer color. Color differences in comparison with the show model or even among themselves are therefore usual. The pet house is stained in the colors as in the picture. You should do it once again to prevent mold and rot. You can easily order the stain together with the pet house.

Hinges and locks/anchorage
It is advisable to treat the hinges and locks periodically with silicone spray or lock spray to prevent rust and corrosion. If the pet house is not in a covered place, we advise you to anchor the house.