Chickencoop Flex 2.1 is made of Douglaswood. This hutch is suitable for 4 till 8 chickens. The sleeping compartment is provided with removable perches. The laying nest has a hinged roof, so that you can collect the eggs very easily. Because of the removable tray you can clean the sleeping compartment very easily. The hutch is provided with 2 exit hatches.
- This chickencoop has a laying nest
- There can be colour differences in Douglas fir. This depends on whether the wood is from the outside of the tree or is heartwood. This colour difference gradually diminishes, due to ageing and discolouration.
- Made of Douglas wood. Frames of 68x44mm, shelves of 18mm thickness. Even without treatment this wood will be sustainable for about 15 years, however it will become grey quickly without treatment.
- The FLEX consist of Standard panels. Therefore you can get it as you want. In the productname, the number of panels is being mentioned. For exemple, FLEX 3.1 is 3 panels wide, and one panel deep.
- The hutch is made of panels of 180x85cm or 180x120cm. This can be screwed together. Drill bit, screws and bits are included.
- The wooden panels have a wooden frame of 68x44 with shelves of 18mm thick
- Meshpannels with black plasticized mesh of 1,1 mm thickness. Mesh of 13x13 mm
- With gangway to the sleeping compartment
- Easy to clean rabbit hutch with handy drawer
- The drawer of this pet house is extra deep and sturdy
Dimensions
| Outer dimensions (WxDxH) | 194x137x196 |
| Outer dimensions nest box (WxDxH) | 70x40x45 |
| Outer ground dimensions (WxD) | 170x94cm |
| Internal dimensions sleeping compartment (WxDxH) | 80x80x85 |
| Internal dimensions bottom run (BxD) | 161x85cm |
| Perches | 2 in het nachthok |
| Thickness vertical beams | 68x44mm |
| Thickness shelves | 18mm |
Instructions for assembly
- Delivered like a kit, with pre-assembled panels. The panels can be easily fixed to each other. Everything is pre-drilled. Drill bit, screws and bits are included.
EAN code: 8719324083478