Rabbit hutch Lily 117x66x46,5cm More photos

The little rabbit hutch Lily is suitable for a dwarf rabbit or a guinea pig. The hutch is easy portable. The run has a mesh floor and a hinged roof. The sleeping compartment has a removable wooden floor and a hinged roof with roofing felt.

Product details

  • Rabbit hutch with the following features:
  • The pet house is made of beautiful pine wood
  • The roof of this rabbit hutch is equipped with roofing felt
  • This pet house has a handy hinged roof
  • Lockable sleeping compartment: door slides to the side (left/right)
  • The pet house is not equipped with anti-chewing strips. To prevent chewing you can order anti chewing stripes.
  • Building kit with mostly pre-assembled panels, incl. fixing materials and instructions
  • Attached run
  • The roof of the additional run is equipped with mesh (ca. 12x12mm)
  • Particularities:
  • If there is high humidity outside, then it is also humid inside a loft. This can cause mold to grow.
  • If the pet house is being used as an indoor cage, we advise you to cover the floor to prevent damage caused by urine, for example
  • Run with different depth then the hutch:
  • Heavy free-range enclosure 8 panels

Dimensions

Outer dimensions including roof (WxDxH) 117x66x46,5cm
Outer ground dimensions (WxD) 115x60cm
Internal dimensions sleeping compartment (WxDxH) 31x58x41cm
Internal dimensions run (WxDxH) 79x56x42cm
Shelf thickness approx. 9mm
Frame thickness 35x20mm

Dimensions of shipping boxes

Box 1 119 x 62 x 12,5cm — 11,5kg

Maintainance instructions

  • You should stain the wood to prevent mold or wood rot
  • It is advisable to clean the wood periodically to prevent mold and green mold
  • You can stain it in any desired colour.
  • If possible, place the pet house at a sheltered place.
  • Matching stain is a transparent or Nature brown stain

Instructions for assembly

  • The pet house is delivered in sturdy cardboard box/boxes
  • Assembly instruction and fastening material is included
  • The holes in the panels are pre-drilled, except for the locks
  • With only one screwdriver/machine you can assemble the complete pet house
  • Place the pet house straight on a flat and firm surface

Information about used materials

This pet house is made from pine wood in the traditional way. Pine wood is a particularly beautiful kind of coniferous wood which has been valued for a long time in our range of pet houses. Especially the wood grain, flame drawing, and changing color shades give the enclosure a solid and warm appearance.

Wood properties
The wood, used for your pet house is a unique natural product which has been processed according to traditional methods in the country of origin, after careful selection. It is characteristic and unique in every way. This wood product has been manually processed. No single piece of wood is the same in shape, structure or color, so color shades are inevitable even within one piece of wood. Wind cracks, imperfections and the presence of large and small knots testify to their origin and years of growth. Bumps are usually manually updated with wood fill. Through use and through the influence of light, new pet houses will finally get a warmer color. Color differences in comparison with the show model or even among themselves are therefore usual. The pet house is stained in the colors as in the picture. You should do it once again to prevent mold and rot. You can easily order the stain together with the pet house.

Hinges and locks/anchorage
It is advisable to treat the hinges and locks periodically with silicone spray or lock spray to prevent rust and corrosion. If the pet house is not in a covered place, we advise you to anchor the house.

EAN code: 8719874155090
Information

Our products

Shopping cart

Save/load shopping cart Explanation

Save shopping cart

You can save your shopping cart for 30 days. You will then receive a unique number that you can save. If you want to retrieve it, enter the number and use the "Retrieve" button.

Number: