The extension run Nijntje can be easily combined with various animal hutches, especially with Nijntje's animal hutch. The highest part of the rabbit enclosure has a height of 109 cm, and the lowest part is 78 cm high. The enclosure is equipped with a wire mesh roof.
Product details
- This run is stained only once for the colour
- This run is made of beautiful pine wood
- With galvanized mesh, approx. 12x12mm, thickness 0.8mm
- Building kit with mostly pre-assembled panels, incl. fixing materials and instructions
- The roof of the additional run is equipped with mesh (ca. 12x12mm)
Dimensions
| Outer dimensions (WxDxH) | 89,5x74x109cm |
| Suitable for: | Nijntje |
| Frame thickness | 35x20mm |
Dimensions of shipping boxes
| Box 1 | 112 x 49 x 10cm — 6,5kg |
| Box 2 | 101 x 76 x 10cm — 4kg |
Maintainance instructions
- You should stain the wood to prevent mold or wood rot
- It is advisable to clean the wood periodically to prevent mold and green mold
- You can stain it in any desired colour.
- Treat the hinges and locks periodically with silicone spray
- Use some wax or vaseline for moving parts such as drawers and sliding panels
- If possible, place the run at a sheltered location
- Matching stain for the white parts is White wash stain
Instructions for assembly
- The run will be delivered in sturdy cardboard box/boxes
- The panels of the run are delivered partially assembled
- You also receive a package of screws to assemble the panels
- The holes in the panels are pre-drilled, except for the locks
- Place the run straight on a flat and firm surface
Information about used materials
This pet house is made from pine wood in the traditional way. Pine wood is a particularly beautiful kind of coniferous wood which has been valued for a long time in our range of pet houses. Especially the wood grain, flame drawing, and changing color shades give the enclosure a solid and warm appearance.
Wood properties
The wood, used for your pet house is a unique natural product which has been processed according to traditional methods in the country of origin, after careful selection. It is characteristic and unique in every way. This wood product has been manually processed. No single piece of wood is the same in shape, structure or color, so color shades are inevitable even within one piece of wood. Wind cracks, imperfections and the presence of large and small knots testify to their origin and years of growth. Bumps are usually manually updated with wood fill. Through use and through the influence of light, new pet houses will finally get a warmer color. Color differences in comparison with the show model or even among themselves are therefore usual. The pet house is stained in the colors as in the picture. You should do it once again to prevent mold and rot. You can easily order the stain together with the pet house.
Hinges and locks/anchorage
It is advisable to treat the hinges and locks periodically with silicone spray or lock spray to prevent rust and corrosion. If the pet house is not in a covered place, we advise you to anchor the house.